Domain Renewal and DynDNS for Freenom.com

Last Update

Latest version: v2021-08-21 (CHANGES.md)

Make sure to add new config options when updating script

This shell script makes sure your Freenom domains don't expire by auto renewing them. It's original functionality of updating an A record with the clients ip address is also retained.

You'll need to have already registered an account at Freenom.com with at least one (free) domain added before you can run the script.

Usage

FREENOM.COM DOMAIN RENEWAL AND DYNDNS
=====================================

USAGE:
            freenom.sh -l [-d]
            freenom.sh -r <domain OR -a> [-s <subdomain>]
            freenom.sh -u <domain> [-s <subdomain>] [-m <ip>] [-f]
            freenom.sh -z <domain>

OPTIONS:
            -l    List all domains with id's in account
                  add [-d] to show renewal Details
            -r    Renew <domain> or use '-r -a' to update All
                  use [-s] with -r to update subdomains
            -u    Update <domain> A record with current ip
                  add [-s] to update <Subdomain> record
                  add [-m <ip>] to Manually update static <ip>
                  add [-f] to Force update on unchanged ip
            -z    Zone listing dns records for <domain>

            -4    Use ipv4 and modify A record on "-u" (default)
            -6    Use ipv6 and modify AAAA record on "-u"
            -c    Config <file> to be used instead freenom.conf
            -i    Ip commands list used to get current ip
            -o    Output renewals result html file(s)

EXAMPLES:
            ./freenom.sh -r example.com
            ./freenom.sh -c /etc/mycustom.conf -r -a
            ./freenom.sh -u example.com -s mail

NOTES:
            Using "-u" or "-r" and specifying <domain> as argument
            will override any settings in script or config file

Installation

Note that this shell script requires recent versions of "Bash" and "cURL"

Auto Installer

Run make install from git clone directory to automatically install the script, conf file and to configure scheduler.

Manually

Suggested installation path: "/usr/local/bin" and "/usr/local/etc" for the config file

Configuration

Settings can be changed in the script itself or set in a seperate config file (default). Every setting has comments with possible options and examples.

First edit config and set your email and password which you use to sign-in to freenom.com

The default filename is "freenom.conf" in the same location as the script or "/usr/local/etc/freenom.conf"
You can also use freenom.sh -c /path/to/file.conf
To optionally put config in the script itself instead: copy settings from conf into freenom.sh (before "Main")

Testing

Test the script by running freenom.sh -l and make sure your domains are listed. To update A record or Renew domains, see Usage or freenom.sh -h

Scheduling

Optionally you can schedule the script to run automatically. The installer creates "/etc/cron.d/freenom" or systemd timers in 'system mode' so the script runs at certain intervals. It will output a message with instructions on how to set your domain(s) to renew/update or renew all:

systemctl enable --now freenom-renew@example.tk.timer
systemctl enable --now freenom-renew-all.timer
systemctl enable --now freenom-update@example.tk.timer

If systemd is not available on your system the installer will use cron instead.

Cron

To manually configure cron:

Copy script and conf files (see Installation)
Copy cron.d/freenom to "/etc/cron.d/freenom" and edit it, or create the file yourself with these line(s)

Example:

0 9 * * 0 root bash -c 'sleep $((RANDOM \% 60))m; /usr/local/bin/freenom.sh -r -a'
0 * * * * root bash -c 'sleep $((RANDOM \% 15))m; /usr/local/bin/freenom.sh -u example.tk'

This first line in this example will run the script with "renew all domains" options every week on Sunday between 9.00 and 10.00

The second line updates the A record of example.tk with the current client ip address, at hourly intervals

Systemd

To manually setup systemd add one or more "timer(s)"

Thanks to @sdcloudt you can use the template units from the systemd dir.

Copy the files to:
- "/usr/lib/systemd/system" (RedHat)
- "/lib/systemd/system" (Debian/Ubuntu)
Create symlinks (or use systemctl enable) to create a service instance for your domain(s)
Reload systemd

Example:

# Create symlinks:

mkdir /path/to/systemd/timers.target.wants
ln -s /path/to/systemd/freenom-renew@.service /etc/systemd/user/timers.target.wants/freenom-renew@example.tk.service
ln -s /path/to/systemd/freenom-renew-all.service /etc/systemd/user/timers.target.wants/freenom-renew-all.service
ln -s /path/to/systemd/freenom-update@.service /etc/systemd/user/timers.target.wants/freenom-update@example.tk.service:
# then reload systemd:
systemctl daemon-reload

In case of any errors make sure you're using the correct paths and "freenom.conf" is setup. Check systemctl status <unit> and logs.

NOTE: to use 'user mode' instead of system mode replace "/system" by "/user" and use `freenomctl --user`

Email Notifications

To enable email alerts make sure MTA is set, the default is 'sendmail'. Emails will be send on renew or update errors. If you do not have/want an MTA installed you could use bashmail instead.

If you want to receive the alerts on a different email address than freenom_email set RCPTTO. You can also set an optional "From" address: MAILFROM="Freenom Script <freenom-script@example.tk>"

Leaving MTA empty or commented disables alerts.

Optional Overrides

The following options can be changed in config, they are however OK to leave as-is.

freenom_http_retry="3"        # number of curl retries
freenom_update_force="0"      # [0/1] force ip update, even if unchanged
freenom_update_ttl="3600"     # ttl in sec (changed from 14440 to 3600)
freenom_update_ip_retry="3"   # number of retries to get ip
freenom_update_ip_log="1"     # [0/1] log 'skipped same ip' msg
freenom_renew_log="1"         # [0/1] log renew warnings details
freenom_list_bind="0"         # [0/1] output isc bind zone format
freenom_http_sleep="3 3"      # wait n to n+n secs between http requests
freenom_oldcurl_force="0"     # [0/1] force older curl version support

Actions

freenom_update_ip="0"         # [0/1] arg "-u"
freenom_update_manual="0"     # [0/1] arg "-m"
freenom_update_all="0"        # [0/1] arg "-a" (future update, not working yet)
freenom_list="0"              # [0/1] arg "-l"
freenom_list_renewals="0"     # [0/1] args "-l -d"
freenom_list_records="0"      # [0/1] arg "-z"
freenom_renew_domain="0"      # [0/1] arg "-r"
freenom_renew_all="0"         # [0/1] args "-r -a"

DynDNS

To update A or AAAA records the nameservers for the domain must be set to the default Freenom Name Servers.

As value your current ip address will be used ("Target")
An record will be added if there is none or modified if the record already exists

IP Address

To get your current ip address from a number of public services the script uses 3 methods:

HTTP method: curl https://checkip.amazonaws.com
DNS method: dig TXT +short o-o.myaddr.l.google.com @ns1.google.com
Manually: you can set a static ip address instead of auto detect

There are a few more services defined for redundancy, the script will choose one at random. By default it will retry 3 times to get ip.

Once your ip is found it's written to "freenom.ip4.domain.lock" (or 'ip6') to prevent unnecessary updates in case the ip is unchanged. To force an update you can remove this file which is located in the default output path: "/var/log".

To manually update: set freenom_static_ip=<your ip> and freenom_update_manual="1", or use the -m option.

Issues

Make sure 'curl' and/or 'dig' is installed (e.g. debian: dnsutils or redhat: bind-utils)

In case of issues try running curl and dig command manually.

To list all 'get ip' commands run freenom.sh -i (or grep getIp freenom.conf)
To disable IPv6: set freenom_update_ipv="4"
To disable dig: set freenom_update_dig="0"

Files

Installer: Makefile
Script: freenom.sh and freenom.conf
Output:
- Path: "/var/log/freenom/" (default)
- Files: freenom.log, freenom_<domain>.ip{4,6}, freenom_renewalResult-<id>.html
Details: use freenom.sh -o to view Result html files

Also see comment "Output files" and freenom_out_dir variable in conf.

Updating

Usually you can just replace "freenom.sh" with the new version, if you're using a seperate config file.

An exeption is when config options were added/changed which you may need to compare and merge. Such config changes are listed in CHANGES.md.

Uninstall

Run make uninstall.

You can also manually reverse the steps under Installation above (e.g. remove .sh, .conf and scheduler files).

Sources

Original script: gist.github.com/a-c-t-i-n-i-u-m/bc4b1ff265b277dbf195
Updated script: gist.github.com/pgaulon/3a844a626458f56903d88c5bb1463cc6
Reference: github.com/dabendan2/freenom-dns (npm)
Reference: github.com/patrikx3/freenom (npm)

Changes

See CHANGES.md

freenom-scriptFreenom.com Domain Renewal and Dynamic DNS script